涂層鋁卷指的是在鋁卷表面進行顏色噴涂后得到的產品，涂層工藝是生產中十分重要的步驟，會直接影響到涂層的質量和產品的耐用性。因此，涂層鋁卷的加工工藝是十分嚴格的。那么廠家在生產涂層鋁卷的時候都包括哪些步驟？鋁卷生產廠家為您介紹：
Coated aluminum coil refers to the product obtained after color spraying on the surface of aluminum coil. The coating process is a very important step in production, which will directly affect the quality of the coating and the durability of the product. Therefore, the processing technology of coated aluminum coil is very strict. So what steps do manufacturers include when producing coated aluminum coils? The aluminum coil manufacturer introduces to you:
1、原料卷輸入：是開卷機連續開卷保證帶卷連續穩定輸入生產線，有的采取十字轉動梁式載卷機，也有采取雙臺前后設置交替開卷機，目的都是為了及時供卷；
1. Raw material coil input: it is the continuous uncoiling of the uncoiler to ensure the continuous and stable input of the coil into the production line. Some adopt the cross rotating beam type coil carrier, and some adopt two sets of alternating uncoilers set in front and back, both for the purpose of timely coil supply;
2、表面清洗和化學處理：是為了將鋁卷上下表面都清洗干凈，并進行化學預處理，以保證油漆可以牢固的附著在鋁卷表面；
2. Surface cleaning and chemical treatment: it is to clean the upper and lower surfaces of the aluminum coil, and carry out chemical pretreatment to ensure that the paint can firmly adhere to the surface of the aluminum coil;

3、涂漆：鋁卷生產廠家在生產過程中，一條生產線上至少有兩個以上的輥涂機，以保證面漆和底漆的兩層涂色；
3. Painting: During the production process, the aluminum coil manufacturer has at least two roller coating machines on one production line to ensure the two layers of color of the top coat and the primer;
4、漆層固化：指的是剛進行涂漆的帶卷要在接觸下一個輥面之前完成固化，避免互相粘連和破壞，一般來講，至少包含兩個固化箱；
4. Paint curing: refers to the curing of the newly painted coil before contacting the next roll surface to avoid mutual adhesion and damage. Generally speaking, at least two curing boxes are included;
5、成品輸出：保證生產線速度與成品卷轉移同步。
5. Finished product output: ensure that the production line speed is synchronized with the transfer of finished products.
以上是鋁卷生產廠家http://www.jietu-edu.com為您總結的涂層鋁卷的生產工藝步驟，希望可以對您有所幫助。無論是對于什么產品而言，正確合理的加工工藝都是保證產品質量的基礎，這一點大家一定要注意。
The above is the aluminum coil manufacturer http://www.jietu-edu.com The production process steps of coated aluminum coil summarized for you are expected to help you. For any product, correct and reasonable processing technology is the basis for ensuring product quality, which we must pay attention to.