1、密度小
1. Low density
鋁及鋁合金的密度接近2.7g/,約為鐵或銅的1/3，鋁及鋁合金的強度高。經過一定程度的冷加工可強化基體強度,部分牌號的鋁合金還可以通過熱處理進行強化處理
The density of aluminum and aluminum alloy is close to 2.7g /, about 1 / 3 of that of iron or copper. Aluminum and aluminum alloy have high strength. After a certain degree of cold working, the matrix strength can be strengthened, and some brands of aluminum alloys can also be strengthened by heat treatment
2、導電導熱性好
2. Good conductivity
鋁的導電導熱性能僅次于銀、銅和金。
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3、涂層均勻、色彩多樣
3. Uniform coating and various colors
靜電噴涂技術使得油漆與鋁板間附著均勻一致，顏色多樣，選擇空間大。

Advanced electrostatic spraying technology makes the adhesion between paint and aluminum plate uniform, various colors and large selection space.
4、易加工
4. Easy processing
添加一定的合金元素后，可獲得良好鑄造性能的鑄造鋁合金或加工塑性好的變形鋁合金，鋁板重量輕，抗拉強度高，延伸性能好，回收殘值高。工藝性好，采用先加工后噴漆工藝，鋁板可加工成平面、弧型和球面等各種復雜幾何形狀。鋁板在工廠成型，制作不需裁切，可以直接二次加工。
After adding certain alloy elements, cast aluminum alloy with good casting performance or deformed aluminum alloy with good processing plasticity can be obtained. The aluminum plate has light weight, high tensile strength, good elongation and high recovery residual value. Good manufacturability. The aluminum plate can be processed into various complex geometries such as plane, arc and spherical surface. Aluminum plate is formed in the factory and can be processed directly without cutting.
5、耐蝕性好
5. Good corrosion resistance
鋁的表面易自然生產一層致密牢固的AL2O3保護膜，能很好的保護基體不受腐蝕。通過人工陽極氧化和著色，可獲得良好鑄造性能的鑄造鋁合金或加工塑性好的變形鋁合金。采用kynar-500、hylur500為基料的pvdf氟碳漆可達25年不腿色。
The surface of aluminum is easy to naturally produce a layer of dense and firm Al2O3 protective film, which can well protect the matrix from corrosion. Through artificial anodizing and coloring, cast aluminum alloy with good casting performance or deformed aluminum alloy with good processing plasticity can be obtained. PVDF fluorocarbon paint with kynar-500 and hylur 500 as base materials can reach 25 years without leg color.